Our soap holders are especially suitable for the fans of solid soaps: shower soaps, hair soaps and, of course, for all those who like to make their own soaps in cold or hot process.
It is an ideal additional product for soap makers, soap manufactures and stores for soap making.
- 100% hygienic: soap doesn't touch the magnet
- Lets your soap float almost contact-free
- Soap detaches easily from holder and returns to it silently
- Holds 150 g reliably. Magnetic force can be reduced for small soaps, e.g. hotel or shampoo soaps
- 100% quality, rust-resistant for life, always looking as good as new
Package: | Carton folder with paper bag 1x |
---|---|
Power of magnet min. 1 - max. 4: | Power of Magnet 3 |
Protector colour: | Blue |
1 of 1 reviews
5 out of 5 stars
Login
15 August 2024 11:33
Produkt gut händelbar, Lieferung ohne Probleme, nicht für alle Seifen geeignet
Bei uns kommen die Seifenhalter mehrfach zum Einsatz. Die Anleitungszeit zum Aushärten nach dem Einsatz des Seifenplättchens sollte eingehalten werden. Leider kam der Seifenhalter für eine Seife mit Meersalz nicht in Frage, da hier wohl die Konsistenz ungeeignet sein wird. Die Tragkraft von 200g wurde hier nicht überschritten.
The Protector Edition holds up to 150g stably
The cosmetic product or soap has no contact with the magnet. Clear separation between hygienic and technical area
Magnet is protected from water and soap and the soap bar is rust-proof on all soaps
100% purity and rust resistance - innovation from SAVONT
- The cosmetic product has no contact with the magnet
- The magnetic force works through the protective material
- Perfectly waterproof and lifelong protection of the magnet
- Better feel: the soap is easier to remove from the holder and is pulled back gently and noiselessly to the soap holder
- The magnetic force can be adjusted! By inserting a thin cardboard disc between the protector and the magnet, the magnetic force can be reduced for light, solid shampoos, for example
- The magnet of force level 3 installed inside the Protector Edition creates a load capacity of 150g for normal soap. If the soap is more flat, the load capacity increases due to the lower leverage
- holds on all smooth and pore-free surfaces: sinks, showers, bathtubs and tiles
- Stone washbasins, marble, non-enamelled stone tiles, mineral cast washbasins are not non-porous; there is no support there.
- The Protector Edition adapts particularly well to curves in the sink
The soap holders from SAVONT enjoy an enormous longevity: we have spent a long time researching and testing materials. You will notice that our soap button (the element to be pushed into the soap) does not rust on any soap and always stays shiny. Our magnets have a rust protection coating. With the protector the magnet is protected for life. The suction cup is flexible and can adapt to both convex and concave curvatures.
- Cleaning: Remove any soap residue on the holder gently with your fingers and water
- To protect the vacuum surface, rinse under running water using just your fingers or even just around the hanging suction cup clean around. Small scratches on the vacuum surface of the suction cup, e.g. caused by abrasive cleaners or continuously moving the suction cup over dry lime, can reduce its tightness
- Only apply the protector to the dry suction cup and magnet
- Please also note our FAQ section about the care of suction cups
SAVONT is the original inventor of the "floating soap holder". We have been manufacturing our products near Nuremberg since 2017 and have continued to develop them further. In order to realize our high-quality “Made in Germany” products, we work closely with small family businesses in Germany. At the beginning of 2022 we were awarded the Bavarian Climate Pact
Naturseifen / Organic soaps
Seife auf Reisen / Voyage with your soap