Magnetic soap holder

Our soap holders are especially suitable for the fans of solid soaps: shower soaps, hair soaps and, of course, for all those who like to make their own soaps in cold or hot process. The box offered here with 108x magnetic soap holders is particularly suitable for further processing, e.g. bundle of soap and soap holder, for soap makers and soap manufactures. Product features Suitable for all kind of soaps: hot or cold processed Lets your soap float and become a "design star". Our soap holder sets the stage The soap is suspended freely and can dry quickly Made in Germany suction cup holds on all smooth and non-porous surfaces: Washbasin, shower, bathtub and tiles Stone washbasins, marble, non-enameled stone tiles, mineral cast washbasins are not totally smooth: air will slowly diffuse into the suction cup. To be sure, please test a suction cup on the desired location before purchase Without drilling and gluing Load capacity at least 150g to 200g depending on the shape of the soap. The more flat the soap, the higher the carrying weight. Eliminate plastic bottles due to liquid soaps: the soap holder lasts for years and you can always attach a new soap to it Save space in the shower or at the sink Features of the Protector - innovation made by SAVONT the magnetic force acts through the protective material perfectly waterproof and lifelong protection of the magnet better handling: the soap is easier to detach from the holder, which is important when the soap becomes smaller the soap is gently and silently pulled back to the soap holder the magnetic force can even be adjusted! By inserting a thin cardboard disc between the protector and the magnet, the magnetic force can be reduced, e.g. for light, firm shampoos. The SAVONT soap holders are quite convenient: the soap can be grabbed where it is supposed to be. As the magnetic holder can be installed inside the sink, there is no need to reach outside the sink to fetch the soap. The solid soap is right at hand and the sink furniture stays clean. Also, your soap dries quickly and can drip directly in the sink. All kinds of soaps, be it cold processed natural soaps, solid shampoo or body soaps find their place on the shower wall. Many of our customers report having a whole "climbing wall" of soaps mounted on the wall. A large hanging shower caddy becomes superfluous. When the soap is used up, the soap holder can be reused. Clean the soap button and press it into the new soap. If the soap is very hard, please follow our instructions and soften the soap on a sponge beforehand. A soap bag is best for the small leftover bars. Our soap holders are flexible and can be repositioned at any time. Cleaning and care Cleaning: gently remove any soap residue from the holder with your fingers and water. To protect the vacuum surface, also rinse only with your fingers under running water or even clean only around the hanging suction cup. Small scratches on the vacuum surface of the suction cup, e.g. caused by scouring agents or often moving the suction cup over dry lime can reduce its tightness Apply the protector only on the dry suction cup and magnet Quality SAVONT soap holders enjoy enormous longevity: we have done long research for the soap button and tested materials for the suction cup. Regarding the soap button, not all stainless steel is the same. You will find that our soap button will not rust on any soap and will always remain shiny. The suction cup is flexible and can adapt to convex as well as concave curvatures. About SAVONT SAVONT is the original inventor of the "floating soap holder". We have been manufacturing our Classic soap holder near Nuremberg since 2017 and have been developing it further and further. In order to realize our qualitative "Made in Germany" products, we closely cooperate with small family businesses in Germany. We were awarded the Bavarian Climate Pact at the beginning of 2022.

Our Jumbo soap holder has been specially designed for large and heavy soaps.With its larger suction cup and stronger magnet, the soap holder carries soap bars up to 250g, such as larger Aleppo soaps. The soap holder allows the soap to float in the sink or shower. Drilling or gluing is not necessary. This also saves space because there is no need to have a soap dish on the sink edge. The soap is always clean as, unlike a soap dish, it no longer rests in its own water, but is suspended freely in the sink or on the shower tile.The Jumbo soap holder has a diameter of 52 mm and height of 16 mm when pressed on. Due to its strong neck, there is no downward bending even with heavy soaps. Unlike other models, the strong magnetic force is not achieved by using a soap button with a higher thickness, but by using a stronger magnet. Soap buttons with too high thickness are difficult to press into a soap, and also more easily tend to detach from the soap again. Where does the suction cup hold, where does it not?Holds on all smooth and non-porous surfaces: washbasin, shower, bathtub and tiles.non-porous are stone washbasins, marble, non-enameled stone tiles, as a precaution, try a suction cup of some kind on the spot as a precaution, try another suction cup on the spot you want to fix the soap holderCombination with Traveler soap container The Jumbo magnetic soap holder is also suitable for our Traveler soap dish. The suction cup can be attached onto the bottom of the soap box and allows a soap to float and to dry in the closed soap box when you are on a tripInfo: our "PROMO" soap box comes without a soap holder, which means you can use this Jumbo magnetic soap holder there. Our standard Traveler soap box includes the Jumbo soap holder.

Our soap holders are especially suitable for the fans of solid soaps: shower soaps, hair soaps and, of course, for all those who like to make their own soaps in cold or hot process. The box offered here with 108x magnetic soap holders is particularly suitable for further processing, e.g. bundle of soap and soap holder, for soap makers and soap manufactures. Product features Suitable for all kind of soaps: hot or cold processed Lets your soap float and become a "design star". Our soap holder sets the stage The soap is suspended freely and can dry quickly Made in Germany suction cup holds on all smooth and non-porous surfaces: Washbasin, shower, bathtub and tiles Stone washbasins, marble, non-enameled stone tiles, mineral cast washbasins are not totally smooth: air will slowly diffuse into the suction cup. To be sure, please test a suction cup on the desired location before purchase Without drilling and gluing Load capacity at least 150g to 200g depending on the shape of the soap. The more flat the soap, the higher the carrying weight. Eliminate plastic bottles due to liquid soaps: the soap holder lasts for years and you can always attach a new soap to it Save space in the shower or at the sink Features of the Protector - innovation made by SAVONT the magnetic force acts through the protective material perfectly waterproof and lifelong protection of the magnet better handling: the soap is easier to detach from the holder, which is important when the soap becomes smaller the soap is gently and silently pulled back to the soap holder the magnetic force can even be adjusted! By inserting a thin cardboard disc between the protector and the magnet, the magnetic force can be reduced, e.g. for light, firm shampoos. The SAVONT soap holders are quite convenient: the soap can be grabbed where it is supposed to be. As the magnetic holder can be installed inside the sink, there is no need to reach outside the sink to fetch the soap. The solid soap is right at hand and the sink furniture stays clean. Also, your soap dries quickly and can drip directly in the sink. All kinds of soaps, be it cold processed natural soaps, solid shampoo or body soaps find their place on the shower wall. Many of our customers report having a whole "climbing wall" of soaps mounted on the wall. A large hanging shower caddy becomes superfluous. When the soap is used up, the soap holder can be reused. Clean the soap button and press it into the new soap. If the soap is very hard, please follow our instructions and soften the soap on a sponge beforehand. A soap bag is best for the small leftover bars. Our soap holders are flexible and can be repositioned at any time. Cleaning and care Cleaning: gently remove any soap residue from the holder with your fingers and water. To protect the vacuum surface, also rinse only with your fingers under running water or even clean only around the hanging suction cup. Small scratches on the vacuum surface of the suction cup, e.g. caused by scouring agents or often moving the suction cup over dry lime can reduce its tightness Apply the protector only on the dry suction cup and magnet Quality SAVONT soap holders enjoy enormous longevity: we have done long research for the soap button and tested materials for the suction cup. Regarding the soap button, not all stainless steel is the same. You will find that our soap button will not rust on any soap and will always remain shiny. The suction cup is flexible and can adapt to convex as well as concave curvatures. About SAVONT SAVONT is the original inventor of the "floating soap holder". We have been manufacturing our Classic soap holder near Nuremberg since 2017 and have been developing it further and further. In order to realize our qualitative "Made in Germany" products, we closely cooperate with small family businesses in Germany. We were awarded the Bavarian Climate Pact at the beginning of 2022.

Classic Edition bundled with a 100g Provence & Co. soap. Provence & Co. is a family-run savonnerie in the south of France.  Our SAVONT Classic Edition with ProtectorOriginal "Savon de Marseille soaps", certified AFSM (http://www.savondemarseille-afsm.fr/notre-charte/) Handcrafted according to the specifications of the AFSM - Association des Fabricants de Savon de Marseille Production in the Provence in the family business - no China goods (see Alibaba offers for fake Marseille soap) Fragrance creations and ingredients from the place "Grasse" in Provence. Perfume and fragrance capital. (http://www.provence-guide.de/grasse/) Soap production with palm oil from sustainable oil farming. Palm oil guarantees firmness, has a regenerating effect and protects against UV radiation.

Your ideal start into the world of floating bar soaps The Home & Travel Bundle gives you affordable soap holders both at home and on the go. The set contains: 3x Classic Protector in small box Traveler soap box incl. Jumbo magnetic soap holder Product description Three Classic Protector soap holders for three soaps, e.g. shower bar soap, shampoo soap, hand soap bar or install soap holder each in the shower, washbasin and bathtub Traveler soap box incl. Jumbo soap holder. The Jumbo magnetic soap holder can be removed from the soap box and be used as a normal magnetic soap holder. During travel, the Jumbo fixes the soap bar inside the soap dish without contact to the walls Alternatively, the Classic Protector soap holders can also be used fixed inside the Traveler About SAVONT SAVONT is designer, developer, producer and original inventor of the floating soap holders since 2017. In 2022 SAVONT developed and patented the Traveler soap box.

Better handling and lifetime protection for your magnet Handling the soap is gently and softly pulled back to the magnetic soap holder the magnetic force acts through the material the load capacity of the Classic with Protector is at least 150g if your soap is rather flat the load capacity goes up to 200g Your soap is easier to remove from the holder: this is important because the soap holder must have the strength to hold a new and large soap and at the same time not be too strong when the soap becomes smaller during usage Magnet protection the Protector seals the magnet and gives it lifelong protection for recycling, take off the Protector and cut open the suction cup. You can retrieve the magnet Usage & Cleaning Dry the soap holder and especially the magnet and simply put the protector over the magnet The Protector keeps your magnet tight and dry. Removing the Protector is not necessary and we do not recommend it. Innovation from SAVONT Despite the success of our floating magnetic soap holder, we thought about how we could further improve the product. With the development of the Protector we were able to optimize several points at once. The floating Classic soap holder and the Protector have been developed and designed by SAVONT in Germany.

Soap caps for magnetic soap holder Did you lose the soap cap or soap disc for your magnetic soap holder? The soap button is the toothed element, that you push into the soap. Our soap button is of highest quality and the only one we know, that won't rust on any soap Rounded tooth. The button is easy to push into a soap and ensures a strong hold in the soap 100% rustproof Special high grade stainless steel, Made in Germany Price is per piece

The patented Vario represents our latest generation of SAVONT soap holders: the magnet is not inserted from the front side of the suction cup, but from the back side, the so-called vacuum side. The magnet has no contact with the soap, nor with water, and is thus permanently protected. The new soap holder has an adhesive surface with a diameter of approx. 40mm. Thanks to the strong magnet, a stable hold for soaps up to 250g is realized. The soap holder will be delivered ready for use. Product features Strong carrying capacity at 250g Suitable for all kinds of soap bars, shower soaps, natural soaps, curd soaps The suction cup holds on all smooth and non-porous surfaces: Washbasin, shower, bathtub and tiles (non-porous are stone washbasins, marble, non-enameled stone tiles, mineral cast washbasins) The Vario is not suitable for metal washbasins 100% rust safe soap disc Can always be removed and attached somewhere else Technical features - Innovation by SAVONT Longevity: the magnet is protected from water and soap. The upper side of the suction cup is closed and the magnetic force acts through the material Recycling: the magnet is fixed without glue and can be removed easily from the suction cup for recyclingon the underside, a circumferential protrusion covers the edge of the metal plate, preventing contact with the surface of the tile or washbasin We make using bar soaps easy With SAVONT soap holders, a soap can be placed where you want it: on the tiles, on the glass of the shower, inside or next to the sink. On any smooth surface. The solution is flexible: you can remove the holder again and attach it somewhere else. Drilling or gluing is not necessary. Another convenient feature is the ability to combine with the Traveler soap box. The Vario can be inserted inside the soap box, fixing the soap floating inside the soap box. When the soap has been used up, all you have to do is clean off the soap button and you can put it in another soap. Cleaning and maintenance Cleaning: gently remove any soap residue from the holder using your fingers and water. Preserve the vacuum surface: by protecting the vacuum surface, the lifetime of the suction cup is prolonged. Small scratches on the vacuum surface of the suction cup, e.g. caused by scouring agents or continuous moving of the suction cup over dry lime can reduce its tightness. Since the vacuum side of the soap holder is always clean, it is best to simply leave it attached when you clean the sink. This also keeps the vacuum side always dry. Keep the Vario dry on the vacuum side and place it in the washbasin / shower on a dry surface SAVONT soap holders enjoy great longevity - our quality Own development: The Vario is the world's first magnetic soap holder with encapsulated magnet. The soap holder is from our own development. We produce in Germany. Although the magnets have an anti-rust coating, the encapsulation of the magnet ensures its durability permanently. Material flexibility: The suction cup is flexible and can adapt to convex as well as concave curvatures. The material used is also approved for the manufacture of baby soothers and toys. Soap button: we have spent a long time researching and testing materials for the soap button. Many other manufacturers will tell you that they use stainless steel. Not all stainless steel is the same. You will find that our soap button will is 100% rust-proof on all soaps. About SAVONT SAVONT is the original inventor of the "floating soap holder". Since 2017, we have been manufacturing our products near Nuremberg and developing it further and further. To realize our qualitative "Made in Germany" products, we closely cooperate with small family businesses in Germany. We were awarded the Bavarian Climate Pact at the beginning of 2022.