Improves handling and maximizes lifetime
- Separation of the hygienic area from the technical area: the soap has no contact with the magnet
- the soap is gently and softly drawn back to the magnetic soap holder
- the magnetic force acts through the material. Due to the friction forces, the load capacity of the Classic with Protector is at least 150g and up to 200g. If your soap is rather flat the load capacity is higher
- the Protector seals the magnet and gives it lifelong protection
- Your soap is easier to remove from the holder: this is important because the soap holder must have the strength to hold your new and large soap and must not tighten too much when the soap becomes smaller.
Magnetic force control
With the Protector, you can also further reduce the magnetic attraction by placing a disc of paper between the Protector and the magnets of your soap holder. If you always use very small soaps, you can use it to reduce the pull on the soap plate.
Use & Cleaning
- Dry the soap holder and especially the magnet.
- Simply put the Protector over the magnet
- The Protector keeps your magnet tight and dry. Removing the Protector is not necessary and we do not recommend it.
Innovation by SAVONT
Despite the success of our floating magnetic soap holder, we thought about how we could improve the product. With the development of the Protector we were able to optimize several points at once. The soap holder protector was developed by us in Ursensollen and is produced in Germany.
0 of 0 reviews
Login