Protector for Jumbo soap holder, 1 piece
Product information " Protector for Jumbo soap holder, 1 piece"
Lifelong Protection for Your Magnet
The Jumbo Protector improves your Jumbo Soap Holder in many ways:
Magnetic Force Control
With the Protector, you can further adjust the magnetic attraction by placing a thin disc of paper between the Protector and the magnet of your soap holder. This is particularly useful if you regularly use smaller soaps and want to reduce the pull on the soap plate.
Application & Cleaning
Innovation by SAVONT
Despite the success of our floating magnetic soap holder, we thought about how we could improve the product. With the development of the Jumbo Protector, we were able to optimize several points at once. The soap holder protector was developed by us in Ursensollen and is produced in Germany.
The Jumbo Protector improves your Jumbo Soap Holder in many ways:
- The soap is pulled back to the magnetic soap holder silently and gently.
- The magnetic force is up to 220g with the Protector. If your soap is rather flat, the holding force can be even higher. Please note that the force is reduced compared to the Jumbo Soap Holder without the Protector to ensure easy handling.
- The Protector seals the magnet and guarantees lifelong protection against moisture and dirt.
- The Protector makes it easier to remove the soap from the holder, which is particularly important if you use smaller soaps. The soap holder must have the strength to hold your new and large soap, and must not attract too strongly when the soap becomes smaller.
Magnetic Force Control
With the Protector, you can further adjust the magnetic attraction by placing a thin disc of paper between the Protector and the magnet of your soap holder. This is particularly useful if you regularly use smaller soaps and want to reduce the pull on the soap plate.
Application & Cleaning
- Dry the soap holder and especially the magnet.
- Simply slip the Protector over the magnet.
- The Protector keeps your magnet sealed and dry. Removing the Protector is not necessary and we do not recommend it.
Innovation by SAVONT
Despite the success of our floating magnetic soap holder, we thought about how we could improve the product. With the development of the Jumbo Protector, we were able to optimize several points at once. The soap holder protector was developed by us in Ursensollen and is produced in Germany.
Login
Jumbo Protector – Heavy-Duty Holder for Large Soaps
mit / ohne Protector:
with Protector
|
Packaging:
1x Packaging
Powerhouse: our strongest soap holder
Some soaps are simply larger – and they need a holder that can keep up. The Jumbo is our strongest soap holder: with a suction cup measuring 50 mm in diameter, it offers significantly more contact area with the wall – and therefore more holding power.
Technically speaking: According to the formula F = p × A (Force = Pressure × Area), the larger surface creates stronger adhesive pressure. This not only improves stability, but also increases the chance that smaller micro-channels will be sealed off.
The neck of the Jumbo has also been deliberately reinforced. It is stiffer than in our other models – so it remains upright even when a heavy soap hangs on it for extended periods. Where other holders tend to bend over time, the Jumbo holds its shape. The Jumbo was developed for larger soap formats like Aleppo or Marseille soaps – for everyone who chooses their soap with intention.
Features:
Load capacity: 220g
Soap plate diameter: 24mm (larger soap plate for stronger hold in the soap)
Suction cup diameter: 50mm
Protector: yes
Color: transparent
Suction cup suitable for: flat, convex, and concave surfaces
Special strengths:
Can overcome small surface leakages
Suction cup with very high slip resistance
Spare parts:
Soap plates and protectors are available as spare parts in our shop
Jumbo Protector – Heavy-Duty Holder for Large Soaps (16x in Display)
mit / ohne Protector:
with Protector
|
Packaging:
16x Display
For soap makers offering generous bars – up to 220 g
Strong hold for heavy soaps. Designed for XL formats, the JUMBO magnetic soap holder combines a powerful 5 cm suction cup with a grade 5/5 magnet – our strongest grip. It offers reliable support for superfatted, handcrafted or rustic soaps – up to 220 g.
Lasting stability and clean aesthetics. Its firmer suction cup ensures a stable, durable hold that doesn't deform under the soap's weight. The overall look remains simple and elegant. The soap stays clean, dry, and well presented – ideal for both home use and retail display.
Clear and sales-oriented in-store display. Presented in a ready-to-sell 16-piece display, it clearly shows how the holder works – no explanation needed. Placed near your standard formats, on shelves or at market stalls, it turns a simple accessory into a trigger for purchase – and reflects the quality standards of your soap brand.
Features:
Load capacity: 220g
Soap plate diameter: 24mm (larger soap plate for stronger hold in the soap)
Suction cup diameter: 50mm
Protector: yes
Color: transparent
Suction cup suitable for: flat, convex, and concave surfaces
Special strengths:
Can overcome small surface leakages
Suction cup with very high slip resistance
Spare parts:
Soap plates and protectors are available as spare parts in our shop